• Free UPS Ground Shipping to Continental USA
• GX42-102412-000 - Ethernet/Network and USB Interface Version
• Autocutter Assembly Installed
• UPS, FedEx and USPS Shipping Label Printer
• Desktop printer can be used to print labels, tags, receipts, or other media up to 4.09" wide
• The GX420T can be used as a direct thermal printer or as a thermal transfer printer
• Print speed: up to 6"/152 mm per second at 203 DPI
• Print width: 4.09" (104mm) maximum
• EPL and ZPL programming languages standard
• Power Supply and Power Cord included, interface cables and transfer ribbon sold separately
The Zebra GX420t is a monochrome desktop direct thermal/thermal transfer label printer prints 6" per second at 203 dpi in a single color, and can be used to print labels, tags, receipts, or other media up to 4.09" wide. This GX420T desktop printer can serve as a direct thermal printer, which heats thermal paper to produce the print, or as a thermal transfer printer, which heats a ribbon to produce the print on the paper. Direct thermal/thermal transfer printers use heat instead of ink and are typically smaller, quieter, faster, and more energy-efficient than dot-matrix printers. The GX420t has a maximum print speed of 6" per second at 203 dpi (dots per inch) and prints labels up to 39" long. The 32-bit processor combined with 8 MB of SDRAM memory and 4 MB of flash memory offers faster first label printing with extensive media graphics. Serial and USB ports allow connectivity to a computer or other devices. EPL and ZPL programming languages are standard.
The GX420t printer's double-walled casing is made of ABS (acrylonitrile butadiene styrene), which helps resist impact. An open-access design facilitates media loading. A reflective sensor allows the printer to identify the gaps, holes, notches, or black marks between labels to print the labels accurately. A transmissive sensor enables it to detect when a roll of media has run out. This product is suitable for use with black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, or tag stock media (all sold separately). The maximum outside diameter for rolls is 5".
Label printers, also known as label makers, can be used to print labels, tags, receipts, and other similarly sized media. Direct thermal and thermal transfer label printers use heat instead of ink to print on coated thermal media. A parallel, serial, or USB port allows a label printer to be connected to a computer. An Ethernet port or wireless capabilities may enable it to be connected to a computer network. Label printers can be used in a variety of commercial environments, including warehouses, laboratories, retail stores, health care facilities, and shipping and receiving facilities.
Zebra GX420T Specifications :
Resolution |
203 dpi (8 dots/mm) |
Memory |
8 MB SDRAM; 4 MB flash |
Print Width |
4.09" maximum |
Print Length |
39" |
Print Speed |
6"/second |
Media Sensors |
Reflective, transmissive |
Label and Liner Width Range |
0.75" to 4.25" |
Label and Liner Length Range |
0.38" to 39" |
Maximum Roll Diameter |
5" |
Core Diameter |
0.5", 1.0", and 1.5" |
Media Thickness Range |
0.003" to 0.0075" |
Media Types |
Black bar, black mark, continuous, continuous receipt, die-cut, fanfold, gap, notched, perforated, receipt, roll-fed, tag, tag stock |
Operating Temperature |
40 to 105 degrees F |
Operating Humidity |
10 to 90 percent non-condensing |
Storage Temperatures |
-40 to 140 degrees F |
Storage Humidity |
5 to 95 percent non-condensing |
Voltage and Frequency |
Auto-detecting 100-240 VAC, 50-60 Hz |
Dimensions |
7.5 x 7.6 x 10 inches (H x W x D)* |
Weight |
4.6 lb. |